Our products

As indicated in the cross-sectional picture above, the part number 1 is ROTOR / Part number 2 is the STATOR.
is named. Stator slot with the motion of the rotor shaft from the electric motor
360 moves inside. With the vacuum and compression generated by this movement, the pump
Pressurized transfer to the outlet pipeline by conveying the product contained in the gaps
Since the stator has a rubber structure, it prevents stretching and deformation.
is durable.

High viscosity values ​​known as monopump (positive displacement pump)
It ensures the transfer of products without problems such as foaming, decomposition and disintegration that do not disturb the properties of the product used for transferring liquid products.
5 Liter / Hour – 200.000 Liter / Hour – 0/24 BAR operation with different capacity and pressure options
Pumps in the range are produced by our company.
Temperature values ​​- 30 c / + 250 c can work without problems
It works silently and without vibration, in open or closed areas, by providing suitable conditions,
can work.
It offers portable or fixed mounting with different versions.
With its suction feature, it provides an advantage in difficult areas that need to be mounted. Max. 8 meters.
Precise product transfer, continuous product transfer without fluctuations and gaps, dosing and ratio control
provides.
Linear study with flowrate measuring system.
0 – 100 Hz with motor frequency control device (Inverter). with suitable conditions in the range
provides work.

These pumps with flange connection are mainly used in food and industrial areas, they are preferred where vacuum is required in fluid and semi-fluid products. It has a robust, durable and very ergonomic design, it is a solution partner for many sectors with the advantages it provides to its users.

Features and Advantages

• High suction feature Maximum 8 meters
• High performance Maximum 200 m3 / h and 24 BAR model range
• Low spare parts requirement
• Pump inlet option Right – Left – Upright connection
• Different sealing solutions upon request (Soft – Mechanical)
• Optional washing inlets and drains
• Different solutions with stainless steel or other alloy steel equipment
• Different rubber types (EPDM-NBR-NR-VITON)

These pumps with open-mouthed chamber inlets are preferred in food and industrial areas, these models are used in non-fluid products with high viscosity with very low viscosity. It becomes a solution partner for many sectors with the advantages it provides to its users.

Features and Advantages

• It is preferred for the transfer of high density products.
• High performance Maximum 50 m3 / h and 18 BAR model range
• Product storage with hood
• Material continuity with the feeding auger
• Bridging and gapless product transfer
• Transfer of products with solid particles
• Different sealing solutions upon request (Soft – Mechanical)
• Optional washing inlets and drains
• Different solutions with stainless steel or other alloy steel equipment
• Different rubber types (EPDM-NBR-NR-VITON)

These pumps with record connection are preferred in the dairy products, food, beverage and beverage sector, and their fast connection capability is among the reasons for preference. It is a product designed for clean and healthy product transfer. It becomes a solution partner for many sectors with the advantages it provides to its users.

Features and Advantages

• Suction feature Maximum 4 meters
• High performance Maximum 30 m3 / h and 24 BAR model range
• Fork joint option for hygienic pumps
• Pump inlet option Right – Left – Upright connection
• Different sealing solutions upon request (Soft – Mechanical)
• Optional washing inlets and drains
• Optional heating and cooling jackets (Wall)
• Different solutions with stainless steel or other alloy steel equipment
• Different rubber types (EPDM-NBR-NR-VITON)

These pumps with large open-mouth chamber inlets are preferred in industrial areas, these models are used in products with high dry matter content. Generally, the cake that comes out after the waste water sludge dewatering process, etc. products are also preferred. It becomes a solution partner for many sectors with the advantages it provides to its users.

Features and Advantages

• It is preferred for the transfer of high density products.
• High performance Maximum 20 m3 / h and 6 BAR model range
• Product storage with hood
• Material continuity with long feeding auger
• Bridging and gapless product transfer
• Transfer of products with a high amount of dry matter
• Different sealing solutions upon request (Soft-Mechanical)
• Optional washing inlets and drains
• Different solutions with stainless steel or other alloy steel equipment
• Different rubber types (EPDM-NBR-NR-VITON)

These pumps with mixer and square inlet are preferred in food and industrial areas, these models are used in non-fluid products with high viscosity. With its agitator, the product remains homogeneous for a long time to the products that need to be crumbled, dried and stuck, and facilitates the fluidity of the product during pump transfer. The pump is controlled by reducer and motor independent of the transfer speed, special seals are used for sealing. It is a solution partner for many sectors with the advantages it provides to its users.

Features and Advantages

• It is preferred for the transfer of high density products.
• High performance Maximum 20 m3 / h and 18 BAR model range
• Product storage with hood
• Breaking up large pieces thanks to the mixer blades
• Material continuity with the feeding auger
• Bridging and gapless product transfer
• Transfer of large masses by shredding
• Different sealing solutions upon request (Soft – Mechanical)
• Optional washing inlets and drains
• Different solutions with stainless steel or other alloy steel equipment
• Different rubber types (EPDM-NBR-NR-VITON)

These pumps with sleeve inlets are mainly used in food and industrial areas, they are preferred where vacuum is required in fluid and semi-fluid products. It has a robust, durable and very ergonomic design, it is preferred for low capacity and dosing purposes, and it is a solution partner for many sectors with the advantages it provides to its users.

Features and Advantages

• Suction feature Maximum 4 meters
• High performance Maximum 4 m3 / h and 24 BAR model range
• High pressure resistance thanks to sleeve connection
• Pump inlet option Right – Left – Upright connection
• Different rubber types (EPDM-NBR-NR-VITON)